LED Curing Light (DMC-DY403) is
multifunctional curing light, which can also be connected to other dental
equipments. Distinctive THREE-SEGMENT detachable design. So it is very
convenient for maintenance.
Features
1
Distinctive THREE-SEGMENT detachable design referring the following figure
Convenient to replace the
problematic part, cutting the cost of maintenance
2 Light intensity, >1000 mW/cm2,
5 watt LED
3 Three Preset Curing Programs
a. Fast mode: Full power all the
time. Working time—15s
b. Soft 1 mode: Generally
increasing power, then full power till the end.
Working time—20s.
c. Soft 2
mode: Generally increasing power, then half power till the end.
Working
time—30s.
4
Multifunctional----can be connected to dental chair
5 Small size, Cordless, Rechargeable!
6 Flexible
build-in meter measuring the light intensity
7 Charging
once lasts up to 40 minutes of use!
8 Fully
guaranteed for one year
9 Charging
time: about 1.5 hours
10 Net
weight: about 215g Feature size: ￠ 24*200mm
11 Fully
guaranteed for one year
Specifications:
a). Power
supply:
Input
voltage: 110-240V,50-60Hz
Output
voltage: 8.3V DC
Output
current: 500mA
b) Internal
power supply
lithium
battery: 7.2 V saturated electricity measures 700mAh
c) Normal
working voltage range: DC 5.0-8.0V
d) Feature
size: ￠ 24*200mm
e). Net
weight: about 215g
Standard
accessory include:
Hand
parts 1 pc
Charging
base 1pc
Adapter
1 pc (European or American type)
Protector
1 pc, light guide 1pc
This unit
can be used as Build-in LED curing light, connected to other dental
equipment.
